Description
Product Description
Boeshield T-9 was developed and licensed by global aerospace leader, The Boeing Company, to fill a need for high-performance, long-term metal protection and lubrication. T-9’s rust preventative spray uses a unique formulation of solvent carrier and paraffin wax coating engineered to penetrate crevices deeply, displace moisture, dissolve minor corrosion, and leave a clean, waxy coating with lasting durability-without using Teflon, silicone, fluorocarbons, MEK, or acetone. Whether it be automotive, bicycle, industrial, lawn and garden, marine, RV or tools, T-9 continues to be the best option for rust prevention and waterproof lubrication.
From the Manufacturer
On a seafaring yacht, a dusty ATV, or a shower door, T-9 has you covered. Boeshield T-9 endures muddy bike trails, rain-soaked back roads, and salted highways. It withstands farmer’s fields, offshore oil rigs, and carpenter’s workshops. For everyone from firefighters and road crews to cyclists and sailors, Boeshield T-9 is the proven solution. T-9 attacks existing corrosion, loosens rusty parts, and flushes out old lubricants. It is also extremely useful for drying wet parts, electrical motors and circuits, ignitions, and connectors. Apply T-9 and wipe off the excess for immediate use. T-9 dries to a waxy, waterproof finish without leaving a sticky film to attract dirt, dust, or mud. T-9 stays liquid long enough to permeate metal crevices and seep deep inside assembled components to leave a durable protective coating as well as lubricating and protecting-all without dismantling your equipment. Apply T-9 to any metal surface and let it dry. One simple step gives you a thin, penetrating film of durable, waterproof protection and lubrication that endures, months after month or mile after mile. T-9 dries to a clean, waxy, waterproof film that won’t wash off in rain, puddles, or mud. You can rinse away sand, dust and grime with water, while leaving the lubricant intact. T-9 will not harm paint, plastic, rubber, fiberglass, or vinyl. It can be used on engines, wiring, and belts. T-9 is nonconductive and will not cause short circuits, so it’s also safe to use on electronics. Use solvent or any emulsifying cleaner to easily remove T-9, or simply respray and allow T-9 to dissolve itself before wiping it off.
From the manufacturer
BOESHIELD T-9 Rust & Corrosion Protection
Boeshield T-9 gives superior corrosion protection and waterproof lubrication in an easy-to-apply, long-lasting formula. One high-performance formula does it all. Whatever the application, whatever the conditions, you can count on T-9 to work harder, last longer and perform better.
On a seafaring yacht, a dusty ATV or a shower door, T-9 has you covered. T-9 endures muddy bike trails, rain-soaked back roads and salted highways. It withstands farmer’s fields, offshore oil rigs and carpenter’s workshops. For everyone from firefighters and road crews to cyclists and sailors, Boeshield T-9 is the proven solution.
None Ya –
You need this for your toolsLast year I refurbished an old milling machine and this was my first cold season for it to sit in my unheated garage. We had a few unseasonably warm days this winter and when I lifted the cover of the mill it was horrific. Condensation was pouring off of every part. There was tons of rust already and I oiled it religiously. I bought this and sprayed it down thoroughly. The next week I was able to just scrape off the rust and I haven’t seen any more coming up. I did the same to my table saw and it worked the same way. Awesome stuff!
Kevin Manasse –
Wild productThis stuff is pretty wild. The spray comes out as a type of oil but it dries to a slightly oily wax like film. I can’t speak to longevity but the initial coating is very nice and shouldn’t be a problem long term. If you spray it on a daily use tool expect it to wear off quickly though. This is really for a longer term storage part or tool.
Ty –
Sprayed the inside of steel bicycle frame to prevent rusting.Not sure if it was the right thing to do since seat tubes need grease.
Mammabone82 –
Great productI absolutely love this product. I used it on my pool rails and it worked great for chemical protection. I used it on my shower curtain rod and it kept it from rusting
ZionSparky –
Used this as a gun lubeI had a semi auto shot gun that would not cycle another shell when it was cold out. This solved the problem
William Flynn –
Creates an excellent barrier.Bought this stuff to use on electrical wiring on my car, and undercarriage, so far so good. It dries like a clear coat paint. Exterior parts seem to start wearing off from weather after several weeks. Seems to work better under the hood or underneath the car.
Montjuleant –
Works great for hand toolsDuring the heatwave earlier in the year, I’d end every day with my clothes completely, 100% saturated in sweat; Any tools I might have had in my pockets during this really didn’t like this, so I tried this stuff out in an attempt to avoid all of my tools being completely rusted over.As is turns out, it worked perfectly; moisture would literally turn into droplets over the wax coating, totally stopping it from getting to the bare metal, and the coating lasts for a while, even with it rubbing off going in and out of a pocket. I’d highly recommend it if you care about keeping your tools shiny.
Moonlilly –
Made by BoeingI took a chance on this product and was very impressed!! I use it on the RV and car. It replaced the previous lubricants for the slide out, step, levelers, door hinges etc…. One can versus the many cans needed for each specific need. The RV repair specialist knew about it and recommended it.